Discover the Armand-Imbeau-Ii: Ratings & Maritime News
IMO: 9703215
Passenger Ro Ro Cargo Ship, Canada
Photos
Vessel Details
MMSI
316030213
Callsign
CFA2686
Width
26.0 m
Length
92.0 m
Reviews (1)
Gabriel
2024-10-18
Position: Engine Cadet
Advantages:
Looking for information about this vessel. Looking for info about this ship? What was it like?
Disadvantages:
No personal experience yet, just gathering info.
Latest News (4)
Ferry Incident at Baie-Sainte-Catherine: 'Armand-Imbeau II' Allides with Wharf
On January 6, 2026, at 7:30 a.m., the ferry 'Armand-Imbeau II', which serves the Tadoussac–Baie-Sainte-Catherine route, encountered an allision with the Baie-Sainte-Catherine wharf as it was preparing to dock. Fortunately, no passengers were harmed during the incident. Following the allision, the vessel was immediately taken to dry dock for thorough inspections. A detailed damage assessment is currently in progress, along with an internal inquiry aimed at uncovering the causes behind this occurrence. As a precautionary measure, service on the route was scaled back, with only one ferry operating until further updates were available. Departures from both sides were adjusted to occur every 40 minutes. The 'Armand-Imbeau II' managed to resume service later in the afternoon; however, another inspection was scheduled for January 7, commencing at 10:00 a.m., leading to a reduced service expected to last for several hours.
Mechanical Issues Sideline Armand Imbau II Ferry in Tadoussac
On June 17, 2020, the ferry 'Armand Imbau II' experienced a significant mechanical failure that was initially thought to be repairable. However, the same issue reoccurred on June 18, resulting in the vessel being grounded in Tadoussac for an indefinite period. Passengers should note that the ferry service is temporarily suspended, with alternative departures scheduled every 40 minutes on the Tadoussac-Baie-Sainte-Catherine route until further notice.
Azipod Malfunction on Armand Imbeau II Resolved After Repairs
On December 12, 2019, the ferry 'Armand Imbeau II' experienced a malfunction in its aft azipod while navigating through coordinates 48°08'20.7" N, 069°43'36.6" W, at approximately 5 a.m. Following the incident, the crew safely maneuvered the vessel to a lay-up berth in Tadoussac, Quebec, Canada, where immediate repairs were initiated. After completing the necessary work, the 'Armand Imbeau II' resumed its operations and set sail from Tadoussac at 6:50 p.m.
Technical Issues Result in Limited Ferry Service on Tadoussac-Baie-Sainte-Catherine Route
As of noon on August 30, 2019, the Tadoussac-Baie-Sainte-Catherine ferry service has been reduced to a single operating ferry due to a malfunction involving an electronic module on the vessel 'Armand-Imbeau II'. This breakdown has disrupted the regular 40-minute crossings over the Saguenay River, impacting local commuters and travelers alike. In response, the Société des traversiers du Québec has initiated repair work and is optimistic about restoring full service by September 1, 2019.
Frequently Asked Questions
🛠️ Did Armand-Imbeau-Ii experience any breakdowns or mechanical failures?
Based on available news reports, Armand-Imbeau-Ii has been mentioned in connection with breakdown-related incidents. There have been 3 news reports mentioning breakdowns. For detailed information about specific incidents, please refer to the latest news section above.
🏴☠️ Was Armand-Imbeau-Ii involved in any pirate attacks?
Based on available news reports, Armand-Imbeau-Ii has been mentioned in connection with pirate-related incidents. There have been 1 news reports mentioning pirate attacks. For detailed information about specific incidents, please refer to the latest news section above.
⚙️ Did Armand-Imbeau-Ii have any engine problems?
Based on available news reports, Armand-Imbeau-Ii has been mentioned in connection with engine-related incidents. There have been 3 news reports mentioning engine problems. For detailed information about specific incidents, please refer to the latest news section above.